Steps to Install and Configure Router via Cisco Support
July 12 2018
Written by Layla Kirk and from
Overblog
For productive work, a good router is important. You can work fast, be more productive, reduce costs and improve security. Cisco routers are known for providing a safe network for transactions. But how can you use the router when you can’t even install it? Installing a router is quite a difficult task which is not possible without proper support and guidance. But don’t worry; Cisco customer support is there to help you. They have laid down the steps to help you install and configure your router.
Steps to install the router:
First, make sure that your device is plugged in and turned on.
Now turn your PC on and click on networks in the notification of Windows 10.
Look at the router positioned under wireless network connection.
You need to enter the password if necessary. The password will be the code that you had entered during the configuration of the settings.
Open your browser and open any site to check your access.
Enter 192.168.1.1 in the address bar to access the admin panel of the subject.
Steps to configure the router:
After you have installed it into your PC, you will have to put the key which came along with Cisco Valet Router into a port of USB drive. A pop up will open.
Place connection to the Valet and wizard will open up.
Follow the steps given by the wizard. These steps will enable you to configure your subject and how to connect them well.
Now you need to gently remove the key and press OK.
By following these steps, you will be able to install and configure your router. But if the problem still persists, then you can contact Cisco Router Support Phone Number 1-800-954-282. We will solve each and every problem you have as we are available 24*7 to give you services, so call today without delaying!